Contrex M-Traverse Manual de usuario descargar pdf (Pagina 88)

3 - 41

The factory defaults for the Output B Control Parameters are found in Table 3-34. To

modify the default parameters refer to Table 3-35. If you are uncertain how to enter a

Control Parameter, review the

Operations: Keypad

section.

Table 3-36 Default Control Parameters for Output B

CP Parameter Name Parameter Value

CP-93 Output B Segment 1

CP-94 Output B Direction 0

CP-95 Output B Polarity 0

Table 3-37 Entering Output B Control Parameters

CP Parameter Name Parameter Value

CP-93 Output B Segment Enter “1” to activate Output B during the constant pitch

plateau segment of the Follower profile.

Enter “2” to activate Output B during the constant pitch

plateau and Accel/Decel segment of the Follower profile.

Enter “3” to activate Output B during the Dwell

segment of the Follower profile.

CP-94 Output B Direction Enter “1” to activate Output B during the forward

direction.

Enter “2” to activate Output B during the reverse

direction.

Enter “3” to activate Output B during the forward and

reverse directions.

CP-95 Output B Polarity Enter “0” to activate Output B as Active Low Voltage

Level.

Enter “1” to activate Output B as Active High Voltage

Level.

1 2 ... 83 84 85 86 87 88 89 90 91 92 93 ... 201 202

Sin comentarios

Contrex M-Traverse Manual de usuario Pagina 88