Contrex M-Traverse Manual de usuario descargar pdf (Pagina 156)

5 - 9

however, you can modify Control Parameter values with

operational data that is unique to your system.

Performance Monitoring Tach

Lead Position

Follower Position

Follower Engineering Units

Product Rate

Position Error

Position Error See Appendix C; MV-49.

PPR Follower See Appendix C; CP-18.

Process Ratio See Appendix C; MV-86.

Product Rate See Appendix C; MV-46.

Profile Ratio See Appendix C; MV-87.

Tach See Appendix C; MV-40.

Traverse Length 1,2,3,4 See Appendix C; CP-02, 04, 06, 08.

Tuning Tuning stabilizes speed error differences between the

setpoint and feedback.

Ring Kits Ring Kits are flange motor mounted sensors that measure

the pulses per revolution (PPR) of the motor shaft.

Resume Enable See Appendix C; CP-32.

RPM Feedback The operating speed of the Follower.

RPM Lead The operating speed of the Lead.

Run The Run discrete input initiates the follower profiling

function. Run can be activated when the M–Traverse is in

F–Stop, however Run cannot be activated when the M–

Traverse is in Jog, Home Seek or Home Return.

Scaling Scaling Control Parameters supply the M–Traverse with

the information that it needs to calculate the ratio of

Follower Lines to Lead Lines, using Engineering Units.

Serial Communications The M–Traverse can interface with a host computer

1 2 ... 151 152 153 154 155 156 157 158 159 160 161 ... 201 202

Sin comentarios

Contrex M-Traverse Manual de usuario Pagina 156