Contrex M-Traverse Manual de usuario descargar pdf (Pagina 125)

3 - 78

Characters 5,6 - Parameter Number:

The Control Parameter Code is sent back to the host computer from the

M–Traverse.

Characters 7 through 14 - DATA:

The Control Parameter or Monitor Variable data that was requested is sent back to

the host computer from the M–Traverse.

For an interpretation of the MV-50 through MV-56 data, refer to

Table 3-43. For the ASCII to binary conversion, refer to Table 3-42.

Character 15 - Data Format:

Character 15 indicates the decimal location and polarity of the data that was

transmitted in characters 7 through 14.

Use the following codes to indicate decimal location and polarity:

Code Format

0 +XXXXXX

1 +XXXXX.X

2 +XXXX.XX

3 +XXX.XXX

4 +XX.XXXX

5 +X.XXXXX

6 -XXXXXX.

7 -XXXXX.X

8 -XXXX.XX

9 -XXX.XXX

: -XX.XXXX

; -X.XXXXX.

Character 16 - ETX:

The return message is always terminated with the ASCII “ETX” character.

1 2 ... 120 121 122 123 124 125 126 127 128 129 130 ... 201 202

Sin comentarios

Contrex M-Traverse Manual de usuario Pagina 125