Contrex M-Traverse Manual de usuario descargar pdf (Pagina 77)

3 - 30

JOG

When you activate Jog, the RPM increase at the acceleration rate that you specified in

the Accel/Decel (CP-60) parameter until the Jog Setpoint (CP-61) is achieved. Jog can

only be entered from F-Stop and when Jog is terminated, the Follower mechanism

returns to F-Stop. Jog is used when you need brief bursts of speed to align the

Follower mechanism.

The factory default Jog Control Parameters are found in Table 3-22. To modify these

default parameters, refer to Table 3-23. If you are uncertain how to enter a Control

Parameter, review the

Operations: Keypad

section.

Table 3-24 Default Jog Control Parameters

CP Parameter Name Parameter Value

CP-61 Jog Setpoint 50

CP-60 Accel/Decel 5.0

Table 3-25 Entering Jog Control Parameters

CP Parameter Name Parameter Value

CP-61 Jog Setpoint Enter the RPM at which you want your system to

operate when it is in Jog.

CP-60 Accel/Decel Enter the number of seconds in which you want your

system to accelerate from zero RPM to the Jog Setpoint

speed.

1 2 ... 72 73 74 75 76 77 78 79 80 81 82 ... 201 202

Sin comentarios

Contrex M-Traverse Manual de usuario Pagina 77