Contrex CX-1200 Manual de usuario descargar pdf (Pagina 35)

Page 33

14) Replace the back plate, making sure that it seats properly and the connectors are all properly

aligned in their slots.

15) Screw the back plate into place with the four machine screws.

16) Screw the ground screw back into place snugly. Replace the connectors. Replace the power

connector.

NOTE: Be sure to follow the calibration procedure before engaging the CX-1200. Refer to

Drive Setup / Calibration: Calibration.

1 2 ... 30 31 32 33 34 35 36 37 38 39 40 ... 54 55

Sin comentarios

Contrex CX-1200 Manual de usuario Pagina 35