Contrex ML-TRIM Manual de usuario Pagina 1

Busca en linea o descarga Manual de usuario para Sensores Contrex ML-TRIM. CONTREX ML-TRIM User Manual Manual de usuario

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 4
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 0
ML-TRIM INSTALLATION/START-UP GUIDE
CAUTION
Hazardous Voltages. Can cause severe injury, death or damage to
equipment. The ML-Trim should only be installed by a qualified
electrician.
Proper earth grounding of all electronic equipment is required for
successful operation. Connect a low impedance earth ground to
terminal 3 of connector J3.
Separate all logic and signal level wiring (J1, J2, J4 and J5) from all
AC power wiring (J3).
Shield all logic and signal wiring (J1, J2, J4 and J5) and terminate to
earth ground at one point only.
REQUIRED WIRING
CC
CC
C
ONTREX, INC.ONTREX, INC.
ONTREX, INC.ONTREX, INC.
ONTREX, INC.
SK1451 Rev 3SK1451 Rev 3
SK1451 Rev 3SK1451 Rev 3
SK1451 Rev 3
Page 1
Vista de pagina 0
1 2 3 4

Indice de contenidos

Pagina 1 - REQUIRED WIRING

ML-TRIM INSTALLATION/START-UP GUIDECAUTIONHazardous Voltages. Can cause severe injury, death or damage toequipment. The ML-Trim should only be instal

Pagina 2

SCALINGAfter completing the required wiring of the ML-Trim, follow the procedure below to scale the ML-Trim and motordrive for Master format RPM opera

Pagina 3 - TROUBLE-SHOOTING

FOLLOWER OPERATIONComplete the “Scaling” and “Tuning” procedures for Master mode (Page 2) before proceeding with Follower operation. To enable Follow

Pagina 4

Step 4: Check MP-47 (Speed Command Out).a) Should not be “0” or “100”.b) If “0”, then return to step 1 of “Scaling”.c) If “100”, check wiring to d

Modelos relacionados M-Trim

Comentarios a estos manuales

Sin comentarios